This functionality is only available for certain module packages. Info

Exporting Wire Processing Data

For the export of wire processing data, the following machine manufacturers are supported:

Depending on the machine type, a file or several files with user-defined or specific file names is / are generated during the export. The exported data itself also depends on the specific machine and its settings. In addition, the wire processing data is exported according to the active electrical configuration.

Prerequisite:

A workspace / workdesk is opened and it contains at least one wire harness.

  1. Select the File > Export wire processing data menu items or the button.

    The Export wire processing data wizard is opened.
  2. Select a template from the drop-down list, or click [...] to open a file selection dialog and browse to the desired template.

    Note:

    An entry in this field is mandatory and defines which data is exported.

  3. Click [...] in the Target directory field to open the Browse For Folder dialog and select the desired directory for the exported data.
  4. If the File name field is not grayed, enter the file name here. Availability of this field depends on the machine type. It is, e.g., not available for Komax machines.
  5. Click [Next].

    The Wire harness step of the wizard is opened.
  6. Select the wire harnesses for which the export is to be carried out and click [Start].

    The export is carried out.

    The wizard displays the error messages that were generated during the export.
  7. Click [Finish] to exit and close the wizard.