This functionality is only available for certain module packages.

You are here: Concepts > IO generation > Procedure for modeling the controller > Division between on and off during an emergency stop

Division between on and off during an emergency stop

In order to make it possible for certain actuators to have their power cut off during an emergency-stop event, while other actuators, e.g. the gripper, continue to receive power, two bus types, on_for_emergency_stop and off_for_emergency_stop, are introduced. Depending on which outgoing bus is registered at a terminal, the connection will either continue to receive power in an emergency-off situation or not.

In this example, the different bus wirings are denoted with different colors.

The names of the bus types are written on the connections.