This functionality is only available for certain module packages.

You are here: Tutorial > SIMATIC Step 7 > Task 2 - Allocating addresses for the inputs and outputs > Changing the level configuration for a station

Changing the level configuration for a station

For the future configuration, the level configuration of the Station component must be changed, so that a Function unit can be inserted below the Station in addition to the Function group.

The level configuration for the Station component is changed as follows:

  1. Open the Station architecture component.
  2. Open the Level configuration editor.
  3. Click .

The Finder dialog is opened:

  1. Press the [Enter] button to list all available components.
  2. Select the Function unit component in the Finder.
  3. Confirm with [OK].