You have opened a project. Options > Settings > Projects > "Project name" > Routing connections > General. Select the Connection filter tab.
In this tab, you can define a filter for the generation of routing path networks. This filter is used for routing path networks in the layout space and the topology.
In the layout space, the settings made here are transferred to the Layout space: Connection filter property (ID 36026) which is available at ducts, routing paths, and routing ranges. The connection filter is used for routing to control which connections may be routed through which routing tracks (channel, manual routing path, routing range, wiring cut-out). Connection filters are considered only if the Layout space: Routing track specification (ID 31094) property is not activated.
In the topology, the settings made here are transferred to the Topology: Connection filter property (ID 20247) which is available at all routing paths. The connection filter is used during routing to control which connections may be routed through which routing track (routing paths and routing points). Connection filters are considered only if the Topology: Routing track specification (ID 31119) property is not activated.
The following dialog elements are available:
Using [...], open the Criteria selection dialog and select there one of the connection properties provided.
In the table, you can enter up to 15 values as criteria for the selected connection property.
The popup menu provides - depending on the field type (date, integer, multilingual, etc.) - the following menu items:
- Popup menu items for the display of tables
- Popup Menu Items for the Editing of Values
- Popup Menu Items for Multilingual Texts
See also