The form is the path along which a rectangular basic outline is moved in order to shape the bent copper rail. Generally, only rectangular outlines are shaped along a form; other cross-section forms cannot be assigned.
A form is created in the outline editor and saved under the file type Form copper (*.fp1); only lines and polylines are permitted here. The form drawing must create a continuous set of lines; it must not contain any branch or double junction. The form can be checked for this purpose. This check is also run prior to closing the form drawing.
When placing a bent rail, a form drawing must be selected that is assigned to the rectangular cross-section of the rail part.
Form and rail generated from it (flat bending)
Position of the origin in the form drawing
The position of the origin is of special significance, which is marked by a red circle. The handle of the rail is at the origin of the form drawing when placing on a mounting surface.
The position of the origin in the form drawing determines the handle of the copper rail.
See also