This functionality is only available for certain module packages. Info / Copyright

Dialog Pre-planning - <Project name>

Use this dialog to display the structure segments and planning objects defined in the project either in the tree or list view and to edit them.

Overview of the main dialog elements:

In the Tree tab, the structure segments and planning objects are displayed in their hierarchical structure. The top hierarchy level is the project; below that, structure segments and planning objects can be created. Structure segments cannot be sorted below planning objects.

Below planning objects, their PLC addresses and function templates are displayed. A preceding status icon indicates whether a macro has been stored at the planning object. Such a macro can be placed in the graphical editor using Drag & Drop. The representation type that fits the page type is offered for placement.

The segments are sorted by default first by their basic definition and then by their designation. The sequence of the basic definitions is:

In the case of PCT loops only the identifying components of the designation are taken into account for sorting, and not the full designation. You specify the properties that are identifying in addition to the number in the dialog Settings: Numbering / PCT loops. Using the arrow buttons, you can modify the sorting of the segments below a node in the tree structure. This manual sorting takes precedence.

Tip:

You can also move segments in the tree view of the pre-planning navigator via Drag & Drop. While dragging, keep the [Ctrl] key pressed to copy the highlighted segments.

Icon

Meaning

Identifies the project level.

Structure segment

Planning object

PCT loop

PCT loop function

Container

Piping planning object

Cable planning object

Segment placed several times on pre-planning pages or subordinate segment that is placed outside the superordinate boxes on the pre-planning page.

Non-assigned detailed planning. Identifies objects from the detailed planning whose associated segments have been deleted. The objects no longer assigned (pages, functions, etc.) are displayed below this node.

Link, meaning a reference to an existing segment in a different structure.

Macro. This icon is displayed when a macro has been stored at the planning object.

Function template for main function. This icon is displayed when function templates are entered at the planning object, or parts at which function templates have been stored.

Function template for auxiliary function. This icon is displayed when function templates are entered at the planning object, or parts at which function templates have been stored.

PLC address. This icon is displayed when PLC addresses have been entered at the planning object.

Structure box. This icon is displayed when a structure segment is placed as a structure box in the P&I diagram.

Piping definition point. This icon is displayed when a piping planning object is placed as a piping definition point in the P&I diagram.

Piping connection point. This icon is displayed when a piping planning object is assigned to a piping connection point in the P&I diagram.

External document. This icon is displayed when an external document has been stored at the planning object.

(An overview on the most important icons for project data can be found in the Icons in the Navigators topic.)

Tip:

Non-assigned objects from the detailed planning whose associated segments have been deleted do not have properties. Through the popup menu item Go to (graphic) you have the possibility to branch to the schematic and there to edit the detailed planning. The popup menu items Disconnect and Delete can furthermore be used to remove the assignment to the pre-planning or to completely delete the object no longer assigned.

In the List tab, the segment definition name, designation and description, as well as structure identifiers for the identifier blocks "Higher-level function" and "Mounting location" are displayed by default. In addition, structure identifiers for further identifier blocks, as well as other properties of the structure segments and planning objects can be displayed (e.g., the properties Technical description, Power consumption or user-defined properties). The values of the properties can be edited directly in the list view.

Filter:

This drop-down list displays all the available filters. A selected filter is automatically activated and is applied to both the tree and the list view. The "- Not activated -" entry deactivates the filter and causes an unfiltered display of the data. Click [...] to open the Filter dialog. Here you can create, edit, delete, copy, export, import, and manage filters.

The popup menu of the Filter drop-down list contains the following entries:

This allows you to toggle rapidly between the unfiltered representation and a representation filtered in accordance with your requirements.

If a structure segment or planning object is hidden via a filter in the tree view, the subordinate structure segments and planning objects will be hidden, too. In the list view, subordinate structure segments and planning objects are not hidden.

Value: <Property>:

Use this field, via Quick input, to adjust quickly the value of a filter criterion for a defined and activated filter.

Popup menu:

Menu item

Meaning

Select all (list only)

Selects all of the entries in the list.

Adjust column width (list only)

Adjusts the width of all table columns so that both the headings and column contents are fully legible.

New structure segment

Allows a structure segment to be created. If there are several segment definitions in the project, the Select segment definition dialog opens first to select the required segment definition. Subsequently the dialog Properties (components): Structure segment is opened, which allows for the properties of the new structure segment to be edited.

New planning object

Allows a planning object to be created. If there are several segment definitions in the project, the Select segment definition dialog opens first to select the required segment definition. Subsequently the dialog Properties (components): Planning object is opened, which allows for the properties of the new planning object to be edited.

New device (planning object)

Opens the Part selection dialog. Allows a planning object to be created with a part. If there are several segment definitions in the project, the Select segment definition dialog subsequently opens to select the required segment definition.

Copy / Paste

Reflects the Windows functions for editing data. Allows for structure segments and planning objects to be copied within the pre-planning navigator. When copying structure segments, the complete subordinate structure is copied as well.

Insert link (only tree)

Inserts a copied segment as a link. Links can be used to reference existing segments in other structures.

Duplicate

Duplicates the structure below the highlighted structure segment or planning object. The designation and structure identifiers are incremented automatically in the process.

Delete

Deletes all selected segments or - in the tree view - all segments below the selected tree structure level. (Multiple selection of segments or tree structure levels is possible here.)

Rename (tree only)

Use this menu item to rename the designation of the highlighted segment. After renaming, the tree structure is updated.

Place

Places the appropriate functions in the schematic for the highlighted planning object or highlighted template. Or places the macro entered at the planning object or the part macro in the schematic.

Before the actual placing press [Shift] in order to start the placement action in the mode "Individual functions". Press [Backspace] to open the dialog Place device and, if required, for example open the macro selection or change the representation type.

Note:

When placing macros, the macro boxes are generally placed, too. The functions, placeholder objects, etc. contained therein are identified on the basis of the macro box and can be updated in detailed planning, if required.

Place (device)

This action is available only for planning objects at which no part has been stored. If the planning object has templates, the device selection will be called. If the planning object does not have any templates, the part selection will be called. The functions of the selected part can then be placed. The part is assigned to the main function, and is not stored at the planning object.

Place functional

Searches for the part macro in the "Functional" representation type and places it as a symbol or macro graphic in the schematic via the subsequent menu. Before the actual placement press the [Backspace] to open the symbol or macro selection and select a different symbol / macro.

Generate new page from macro (only list)

This menu item is available if a macro is entered at the marked planning object. Generates a new schematic page. In the process the macro stored at the planning object is placed on the page. The name of the page is determined automatically from the structure identifiers of the planning object. Multiple selection is possible.

Update detailed planning

Transfers the modified data from the pre-planning to the objects in the detailed planning that are linked to the segments marked here. This takes into account the highlighted segment and all subordinate segments. Multiple selection of segments is also possible.

You specify the updating scope in the subsequent dialog Update detailed planning.

Assign

This menu item is available when a project page has been opened, and one of the following objects is highlighted in the pre-planning navigator:

  • Planning object: Assigns the highlighted planning object to the selected function on the project page. The target functions are linked with the planning object from which they have been given the assignment. There may be only one main function per planning object. If the target is a main function, the parts stored at the planning object will be carried over to the target function.
  • Template: Assigns the highlighted template to a function on the project page. The target functions are linked with the planning object from which they have been given the assignment. There may be only one main function per planning object. If a main function template is assigned to a main function, the parts stored at the planning object will be carried over to the target function.
  • PLC address: Assigns the highlighted PLC address (PLC address, symbolic address, function text, data type) to a PLC connection point on the project page.

Generally, protected functions cannot be the target of an assignment.

Split

Splits a function from the linked planning object.

Number PCT loops

Renumbers the PCT loops selected in the navigator . In the process the settings for numbering in the Numbering / Availability tab of the dialog Configure segment definitions.

Reset to segment template

Resets the modified values of a segment to the values predefined in the segment template.

Change segment definition

Opens the Select segment definition dialog, and allows for the segment to be assigned another segment definition.

Create pre-planning macro

Creates a pre-planning macro that contains the highlighted structure segment or planning object, and the structure below it.

Insert pre-planning macro

Opens the Select pre-planning macro dialog, and inserts the selected macro below the highlighted structure segment or planning object. No macros containing structure segments can be inserted below planning objects.

Go to (cross-referenced)

Enters cross-referenced segments and functions into the Go to list and opens it. All placements of the segment, the linked functions and associated entries are output in the pre-planning reports.

Go to (all representation types)

Enters all of the representation types of the segment or function (e.g., on a pre-planning page and report page) into the Go to list and opens it.

Go to (graphic)

Displays the placement of the highlighted segment or highlighted function in the graphical editor.

List with preselection (tree only)

Reduces the number of elements displayed in order to allow for a faster orientation in the list view. If this option is activated, the list view is called up with an automatic filter (preselection) containing the elements that are currently selected.

Select in tree (list only)

Displays the marked object in the Tree tab.

Configure representation

Opens the Configure representation dialog, where you define which properties are to be displayed in the list and tree view.

Note:

Please note that during the configuration of the tree view in the dialog Configure representation you do not configure the representation of the segments, but can only specify which properties are to be displayed for the other objects (projects, functions, structure boxes, piping definitions, etc.) in the tree. The representation of the segments in the tree of the pre-planning navigator is specified via the Display format navigator field in the dialog Configure segment definitions.

Properties

Opens the Properties (components): <...> dialog. Allows you to edit the properties of the segment or function.

Properties (global)

Opens the Properties (global): <...> dialog. Allows the editing of the device properties.

See also