This functionality is only available for certain module packages. Info / Copyright

Tab Placement (connection numbering)

In this tab you specify the frequency of connection definition point placements for one connection.

Overview of the main dialog elements:

Symbol (graphic) group box

This group box shows the symbol that is placed on the connection definition point. Here you can assign a different symbol variant or a different symbol to the connection definition point.

Number / name:

This field displays the symbol number and name of the current symbol. Click [...] to open the Symbol selection dialog and select a different symbol if necessary.

If available, a preview of the symbol is shown in the adjacent field.


Group box Number of placements

Here you specify how often connection definition points can be placed.

On every individual section:

If this option has been selected, a connection definition point is placed on every individual section of a connection (centered on the section). No connection definition points are placed on sections through which several connections pass.

Once per connection:

If this option has been selected, a connection definition point is placed on the graphically first individual section of a connection (centered on the section). Which section is graphically the first one is determined by the reporting direction of the plot frame used.

Once per page:

If this option has been selected, a connection definition point is placed on the graphically first individual section on the page (centered on the section). Which section is graphically the first one is determined by the reporting direction of the plot frame used.

If a connection runs across several pages, the connection designation can thus be displayed on each page.

At the beginning and end of the connection:

If this option has been selected, a connection definition point is placed on the graphically first and graphically last individual section. Which section is graphically the first or last one is determined by the reporting direction of the plot frame used. The connection definition points are placed near the source or target function.

Notes:


Align placements with each other:

If this check box is selected, connection definition points are aligned horizontally or vertically with one another on sections if the following conditions are met:

The sections that meet these criteria make up a group, within which the connection definition points are aligned to each other. Thus the parallel sections that have different spacing are not recognized as a group. The connection definition points on these sections are not aligned to each other either.

Normally, the connection definition points are aligned at the first graphical connection definition point within the group. If this is not possible, because the connection definition point is outside the common coordinate area, the next connection definition point of the group is considered. If none of the connection definition points is within the common coordinate area, the connection definition points in this coordinate area are moved.

If the check box is deselected, then connection definition points are generally not aligned with one another.

See also