This functionality is only available for certain module packages. Info

Panel Tree view

The Tree view panel displays the current content of the working window in the form of a hierarchical tree view.

There are several commands available in the popup menu. These can be applied to individual tree view nodes / items. Tree view items can be automatically sorted by their type and name. The following popup menu items are available:

Command

Description

Zoom to

Zooms the working window to fit a selected item.

Delete

Deletes the selected items.

Show

Shows a selected item (if invisible).

Hide

Hides a selected item (if visible).

Hide all but me

Hides all objects in the working window except for the selected one.

Go to wire / Go to pin

Selects (and highlights) a wire connected to a selected pin. / Selects (and highlights) a pin to which a selected point is connected.

Note:

The Go to wire and Go to pin commands are available for wire ends (subnodes of pins and wires) only.

Add to bookmarks

Adds the selected object to the Bookmarks list.

Replace

Allows to replace a selected object with a different one of the same type.

Activate wire / Deactivate wire

Activates the selected non-active wire of a cable. You are then prompted to select the pins for the wire to be connected. / Deactivates the selected wire of a cable. Such a wire is then disconnected and has no graphic representation in the workspace. Non-active wires also do not appear in nailboards, cable drawings, and reports.

Collapse all

Collapses all nodes.

Expanding / collapsing a particular node

To expand a particular node in the tree view, press [+] on the keyboard. To collapse a particular node in the tree view, press [-] on the keyboard.

Expanding / collapsing multiple nodes

To expand a particular node together with all of its subnodes at once, press [*] on the keyboard. To collapse all nodes at once, press [/] on the keyboard.