This functionality is only available for certain module packages. Info

Panel Report source

The report source is basically a summary of some characteristics of the report in the form of a table of wire harnesses, their source and last update. Wire harnesses can be added to and removed from the report, and wire harnesses from a workspace / workdesk can be combined.

The table contains the following columns:

Name

Source

Last update

Name of the wire harness

Name of the source workspace / workdesk of the wire harness

Last update of the workspace / workdesk

Add wire harness

  1. Click the Add wire harness button on the toolbar.

    A wire harness selection dialog is opened.
  2. Switch between workspace and workdesk by selecting one of the options, select the desired wire harness(es), and click [Finish].

    The report source table and the report itself are immediately updated after the wire harnesses have been added.

Remove wire harness

  1. Select the desired wire harness(es) in the Report source panel. Multiple wire harnesses can be selected with the [Ctrl] or [Shift] key and the right-hand mouse button.
  2. Click the Remove wire harness button on the toolbar.

    A prompt for confirmation is displayed.
  3. Click [Yes] if the wire harness(es) is / are really to be removed.

    The selected wire harness(es) is / are removed.

Note:

For wire harnesses report and cable units report the report source cannot be changed, source of both reports are all workspaces / workdesks documents in the entire project variant.

Report type

The Report type field displays the type of report, e.g. "Bill of materials", "Cable report", etc. This can be handy when the name of your report doesn't reflect its type.

Status

The Status field either shows the Up to date or the Out of date status. In the latter case, use the Tools > Update menu item or the button on the toolbar to synchronize the report with the workspace or workdesk source.

Last report update

The Last report update field displays the date and time when the opened report was last updated.

Electrical configuration

The Electrical configuration field lists the used electrical configuration. When none is used, the Not specified entry is displayed.

See also