This functionality is only available for certain module packages.

You are here: Administration > Installation > Stand-Alone installation

Stand-Alone installation

The installation is carried out as follows:

  1. Copy the setup file to the workstation.
  2. Execute the setup file to start the setup.
  3. Follow the instructions of the setup wizard.

Additional installation steps for data back end with EOX file:

After the installation, the following change must be made to the initialization file ec.ini, so that an EOX file is accessed for data back end, rather than the default FastObjects database:

  1. Open the file <Installation folder>/ec.ini with any editor (e.g., Notepad).
  2. Change the following entry in the ec.ini file to start EEC with a designated FastObjects database:

before: -Dorg.foederal.sn.connectionURL=proxy://any

after: -Dorg.foederal.sn.connectionURL=fastobjects://LOCAL/db

Afterwards EEC has to be licensed, bevore it can start (see Licensing and Starting).

More: