This functionality is only available for certain module packages.

You are here: Tutorial > Mechatronic > Generation of variants via parameterization > Assign parameter to components

Assign parameter to components

The new parameters must now be added to the components Feeder, Axis and Cylinder:

  1. Open the Feeder component (double-click Feeder in the library T_Mechatronic_ModularSystem)
  2. Switch to the Parameters editor page.
  3. Insert the Option_Inspect_available parameter.

A parameter is added by clicking on or via Drag & Drop.

  1. Repeat the steps 1 to 3 for the Axis function unit, and insert the parameters Sensor_2_available, Sensor_3_available, and Sensor_4_available.

A default axis is to have four sensors. The default, that is the value, that is used when there are no other configurations must, therefore, be true:

  1. In the Value column, select for the parameter Sensor_2_available, Sensor_3_available, and Sensor_4_available true from the drop-down list.
  2. Mark the Cylinder actuator and insert the parameter Option_Two_Valves.
  3. In the Value column, select for the parameter Option_Two_Valve false from the drop-down list.