Braided sleeves are a knitted protection of a bundle. In the braided sleeve-specific properties you can determine the braided sleeve's characteristics. The following properties are available:
Property |
Description |
---|---|
Diameter |
Diameter range of the braided sleeve application. |
Knitted density |
Density (in percent) of the knitted fabric. |
Braid crossings p.i. |
Number of crossings per inch. |
Length correction |
Length correction of the final length of a braided sleeve depending on the fill ratio intended for manufacturing purposes. The braided sleeve can depend on a material shortened by a percentage value defined in the Length correction property. Length correction = 10%. In case the braided sleeve is 100% filled, then the required braided sleeve will be computed in the bill of materials and surface protection report by +10%. In case the braided sleeve is filled with 60%, the final length will be +6%. |
Material |
Determine / create / edit / remove material when used in workspace / workdesk. |
Pattern |
Determine / create / edit / remove pattern. The pattern is used in the nailboard. |