This functionality is only available for certain module packages. Info

Modifying Cable Unit

Existing cable units can be modified. Objects can be added to them or be removed from them.

Prerequisite:

A cable unit must exist in the workspace / workdesk.

  1. Right-click on a cable unit in the workspace / workdesk tree view, and select the (Modify cable unit) popup menu item. Or right-click in the cable unit content of the Properties panel, and select the (Add to cable unit) popup menu item.

    The command bar is activated and the content of the cable unit displayed.
  2. To add objects to the content of the cable unit, select the desired object by left-clicking. To select multiple objects left-click the objects while pressing down the [Shift] key.
  3. Click the (Add to cable unit) button in the command bar.

    The objects are added to the cable unit content.
  4. You can toggle objects to be included in the cable unit or be excluded from it by activating / deactivating the corresponding check box in the cable unit content of the command bar.
  5. To remove unwanted objects from the cable unit, select the object in the cable unit content of the command bar and click the (Remove from cable unit) button.

    The object is then no longer available in the cable unit content and thus not part of the cable unit any more.
  6. Optionally click the (Check all) / (Uncheck all) buttons to toggle selection of all the objects at once.
  7. Click [OK].

    The content of the cable unit is modified.