This functionality is only available for certain module packages. Info

Inserting Multiple Seals

Multiple seals are cavity seals that cover multiple connector housing cavities at once to seal and fix a wire to an exact position in the connector cavity.

Unlike cavity seals, multiple seals are used for multiple wires. They are placed within a connectable object or special component in the workspace / workdesk if they have the Multiple seal property defined in Library.

A multiple seal receives the wire harness identifier of the special component or connectable object which it is placed on.

  1. Select the Insert > Place multiple seal menu items or the button on the toolbar.

    The Part navigator dialog is opened.
  2. Select the desired multiple seal and click [OK].

    The Part navigator dialog is closed.

    If a suitable object had been selected before clicking the Place multiple seal button, the seal is placed upon clicking [OK].
  3. Insert the multiple seal by clicking on a special component or connectable object.
  4. Repeat the command by using the space bar or clicking the Place multiple seal button again, if desired.

See also