This functionality is only available for certain module packages.

You are here: Tutorial > EPLAN Electric P8 > Create EPLAN Electric P8 components > Divide EPLAN Electric P8 schematic into macros > Create window macro for page > Create copies of pages

Create copies of pages

Create the first copy of the 1 Sensors page for the window macro:

  1. If necessary, open the Macro_Project project again.
  2. Highlight the 1 Sensors page.
  3. Select Edit > Copy.
  4. Select Edit > Insert.

The Adapt structure dialog opens.

  1. In the Page name field, enter the text 1a.
  2. Confirm with [OK].

The Insertion mode dialog opens:

  1. Select the Do not modify option.
  2. Confirm with [OK].

Change the description of the 1a Sensors page in the page properties:

  1. Highlight the 1a Sensors page.
  2. Select Edit > Properties.

The Page properties dialog opens.

  1. In the Page description field, enter the text Page.
  2. Confirm with [OK].

You must also create a copy of the 1 Sensors page for the fragments of the sensors:

  1. Copy the 1 Sensors page.
  2. Enter 1b in the Page name field.
  3. In the Insertion mode dialog select the Do not modify option.
  4. Confirm with [OK].

By now the project Macro_Project should contain the following pages: