This functionality is only available for certain module packages. Info

Replacing Parts

The Replace function is used to replace objects with others of the same type. All part types available in EPLAN Harness proD Library may be replaced (i.e. connectable objects, wires, splices, cables, leading parts, clips, grommets, parts, connectable object housings, backshells, etc.). Multiple parts of the same type can be replaced at once; if, e.g., multiple wires are selected, they can be all replaced by another wire.

Note:

The only part which may not be replaced is the ribbon cable.

  1. Select the object which you would like to replace.
  2. Select the Edit > Replace menu items or the button.

    The Part navigator dialog is opened.
  3. Select the desired part and click [OK].

    The Part navigator dialog is closed.

    The original object is replaced by the one you selected.

Replacement rules for cables

The following rules apply to cable replacement:

Replacement rules for connectable objects

The following rules apply to connector, terminal and connectable object replacement:

Replacement rules for leading parts

The following rules apply to leading part replacement:

Replacement rules for special components

The following rules apply to splice replacement:

See also

Updating Parts from Library