Each angle of a placed copper rail can be modified directly on the item.

Preconditions:

• You have opened a project and in it a layout space.
• The layout space contains placed busbars (bending).

1. Edit > Graphic > Change angle
2. To modify the angle of a leg on a bent copper rail, move the cursor over the item.
   
   Bending positions where the angle can be changed are marked with a green point.
3. Select the green point at the required bending position.
4. You can then rotate the end point of the selected leg, or you enter a new angle value on the keyboard.

See also

Editing a Copper Rail

Copper Rail: Changing the Length

Copper Rail: Changing the Bending Positions

Copper Rail: Adding a New Bending Position