It is possible to generate reports for the cut-outs displayed in the 2D drilling views. The most important data of these manually inserted cut-outs or cut-outs imported from drilling patterns can be displayed structured in a table.
The report type "Cut-out legend" is available to this purpose in the dialog Select report. Analog to the enclosure legend a cut-out legend can be output as a new report page or be placed manually as an embedded report in an existing project page.
In the reports of this type the most important data of the cut-outs are listed in a table (for example item designations such as the respective drilling type "Drill hole", "Rectangle", "Slotted hole" etc., X , Y coordinates of handles, size of the cut-out, etc.).
Preconditions:
- You have opened a project.
- The project contains NC-relevant cut-outs.
- You have opened a page in the graphical editor. The page contains a 2D drilling view.
- The Suppress generation of the enclosure legend property is not activated in the property dialog of the 2D drilling view.
- You have specified a form for the Cut-out legend report type with the file type "Cut-out legend (*.f47)" in the dialog Settings: Output to pages.
- Select the following menu items: Utilities > Reports > Generate
- In the Reports - <Project name> dialog, click (New).
- Select the Manual placement entry in the Output format drop-down list of the Select report dialog.
- Select the Cut-out legend report type from the list of available reports. Click [OK].
- If required, carry out further filter settings in the dialog Settings - cut-out legend. Click [OK].
The legend is hanging on the cursor. - Place the legend on the page in the graphical editor.
See also