When part placements are placed, the part placement assumes the mounting location of the mounting panel. In the process, a check is performed to see if the part placement has been performed on the correct mounting panel, based on the structure identifier blocks of the mounting panel and the placed device. In addition to this, you can compare the Mounting site (describing) property of the mounting panel with the main function.
Example: |
Mounting panel |
Device |
Status |
|---|---|---|
|
=A1+O1-MP1 |
=A1+O1-K1 |
Correct |
|
=A1+O1-MP1 |
=A1+O2-K1 |
Error |
|
MP1 (Mounting location =O1) |
K1 (Mounting location =O1) |
Correct |
|
MP1 (Mounting location =O1) |
K1 (Mounting location =O2) |
Error |
Preconditions:
- You have opened a project.
- You have selected Options > Settings > Projects > "Project name" > Management > Message management and in the Settings: Message management dialog, in the Check-related settings field you have clicked [...].
- If necessary, in the Settings: Messages and checks dialog, select a Scheme for the settings, or create a new one.
- Select the Class "Panel layout".
- Define the individual errors and messages in the table on the right-hand side of the Category and Type of check dialogs by selecting an entry from the drop-down list for each one.
- Click [OK].
Once you have performed this, when making part placements on the mounting panel, these are then checked according to the settings; if disagreement is found, then a suitable message is displayed.
See also