This functionality is only available for certain module packages. Info / Copyright

Data Transfer of EPLAN PPE Projects: Properties

During the data transfer of projects with PPE database the properties from EPLAN PPE are converted into user-defined properties for the pre-planning. These properties are displayed below the nodes EPLAN and PPE in the tree of the configuration dialog Configure properties.

A property can be assigned to different property groups in EPLAN PPE. Since a property has to be unique in the EPLAN Platform, the property groups are mapped as additional nodes in internal identifying property names (GROUP1GROUP8) during the data transfer and used as part of the displayed name. The displayed name can be changed later.

These properties that were previously used in a property group are assigned by default to the categories "Pre-planning 1" to "Pre-planning 8" for the display in the program. The use of these categories allows the properties to be displayed better structured for example in the property dialog of the segments. However, grouping of the properties into the categories is not mandatory.

All other transferred PPE properties have the category "Data" assigned by default.

Property group (PPE)

Node

Category

General loops / General consumers

GROUP1

Pre-planning 1

Measured medium data / Type of consumer

GROUP2

Pre-planning 2

Measuring-point data / Electr. consumer data

GROUP3

Pre-planning 3

Instrumentation data / Mechanical consumer data

GROUP4

Pre-planning 4

Regulating substance data / Control

GROUP5

Pre-planning 5

Control point data / Starting behavior, motor

GROUP6

Pre-planning 6

Actuator data / Design

GROUP7

Pre-planning 7

Other loops / Other consumers

GROUP8

Pre-planning 8

See also