Icons in the Navigators

The following table lists the most important icons and their meaning that are used in several project data navigators. Specific icons are explained in the respective navigator dialogs. The icons for the page navigator can be found here.

Icon	Meaning
	Identifies the project level. This icon is only displayed when several projects are open.
, , , , ,	Project structure level (preceding sign view for Functional assignment, Higher-level function, Installation site, Mounting location, Higher-level function number, User-defined structure)
	Prefix
	Prefix / identifier
	Counter
	Subcounter
	Device
	Function, representation type "Multi-line"
	Function, representation type "Overview"
	Function, representation type "Pair cross-reference"
	Function, representation type "Single-line"
	Function, representation type "P&I diagram"
	Function, representation type "3D mounting layout"
	Function, representation type "Functional"
	Function, representation type "Function overview (fluid power)"
	Function template
	Part placement
	Part
	Assembly part
	Black box, PLC box
	Shield
	Cable definition
	Plug definition
	Terminal strip definition
	Distributed terminal
	Insulated wire termination

Notes:

The icons for the various representation types and for the special functions (for example black boxes, cable definitions, etc.) are often used in combination with other icons. Thus the preceding icon means a main function (for example multi-line main function).
In the navigators for displaying devices all devices that have only a device tag but no structure identifiers like higher-level function, mounting location, etc. are sorted into the Without structure identifier tree structure level. All the devices that do not have a DT are sorted into the Without DT tree structure level.

The following table lists the most important icons that are used in combination with other icons.

Icon	Meaning
	Placed main function (for example placed multi-line main function)
	Unplaced main function (for example unplaced multi-line main function)
	Unplaced function / unplaced object (for example unplaced multi-line function)
	Superimposed function (for example superimposed multi-line function)
	Safety function (for example multi-line safety function)
	Function / segment with device protection (for example multi-line main function with device protection)
	Function / segment with change protection (for example multi-line main function with change protection)
	Faulty function or faulty object (for example faulty multi-line function). After project check runs, this icon is displayed if the function / object contains inconsistent or incomplete data.