This functionality is only available for certain module packages. Info / Copyright

Mounting Lists: Principle

In EPLAN Pro Panel, you can generate the Mounting list report for 3D part placements of a layout space. Mounting lists are used to map in a report the hierarchical structure of a mounting layout in the layout space. The report can be done for a very specific part placement (mounting panel, enclosure, busbar, etc.).

In such a function-based report, the 3D part placements are evaluated for which the Output in mounting list (ID 36032) property has been activated in the property dialog. This property can be selected via property selection for all 3D objects (except for mounting surfaces). For a device with the activated property, all devices of the hierarchy level immediately below are listed in the output mounting list. The listed objects are sorted by legend item by default.

To create a mounting list, you can use the "Mounting list" report type available from the Select report dialog. During the output of the mounting list you can carry out a manual selection. In the subsequent dialog, all 3D part placements are listed for which the Output in mounting list property has been activated.

Forms for mounting lists

In creating the mounting list, the form is used that was specified in the project-specific Settings: Output to pages dialog for the "Mounting list (*.f32)" form type. You can select placeholder texts from the following elements for the forms of this type in the Placeholder texts - Mounting list dialog:

The same placeholder texts are available for selection in both the header and data area.

Filtering in the layout space navigator

If you want to know which devices have been set aside for the generation of the mounting list, create a new filter for the layout space navigator and select for such filter the Output in mounting list property as a filter criterion.

See also