This functionality is only available for certain module packages. Info / Copyright

Inserting Model Views

Model views are standardized views and views of equipped mounting surfaces. They are used for display purposes and for creating drawings. Additional information such as dimensioning, texts, etc. for enclosure production (enclosure equipment) can be drawn in the model views using standard platform functions.

Precondition:

You have opened a project.You have opened a project page in the graphical editor.

  1. Select the Insert > Graphic > Model view (<...>) menu items.
  2. Press [Enter] to specify the first corner of the area for the model view.
  3. Open a frame using the arrow keys. You can open the frame in any direction.
  4. End area selection with [Enter].
  5. Define the data specific to the model view on the View tab of the Model view dialog.
  6. On the Display tab, define the display settings for describing the model view, such as font size, alignment and width / height of the alignment box.
  7. On the Rectangle tab, define the graphical properties of the model view border, such as starting point, end point, and width.
  8. On the Format tab, define the format properties for the model view border.
  9. Click [OK].

    The Model view dialog closes and the model view is placed on the page according to the settings.

See also