This functionality is only available for certain module packages. Info / Copyright

XML Export / Import: Overview of the Selection Lists

Below you will be given an overview of all selection lists that apply for certain attributes, dependent on any tag being used.

functiontemplate: characteristics (Characteristic)

Note:

For cables / connections this is the potential type.

Internal value

Display value

0 Undefined
1 L
2 N
3 PE
4 +
5 M
6 -
7 SH
8 PEN

functiontemplate: terminalfunction (Terminal category)

Note:

This property is only available for terminals.

Internal value

Display value

0 Feed-through terminal
1 Isolating terminal
2 Switching terminal
3 Diode terminal
4 Fused terminal
5 Resistance terminal
6 Thermocouple terminal

functiontemplate: plcbussystem (Bus system)

Internal value

Display value

0 Other bus systems
1 CANbus
2 DeviceNet
3 EtherCAT
4 Ethernet
5 Foundation Fieldbus
6 Interbus
7 Lightbus
8 Local-Bus: Rack / PLC card
9 ModBus
10 MPI-Bus
11 Profibus
12 Profinet
13 ASI
14 Local-Bus: Extension
15 X2X
16 Powerlink
17 CC-Link
18 ControlNet
19 DALI
20 EIB
21 EtherNet/IP
22 FIPIO
23 LON
24 RS232/RS485
25 SERCOS interface
26 USB
27 IPLink
28 Axioline
29 DIOBus
30 RIOBus
31 ERIOBus
32 RIO/DIO-Bus
33 MDI I/O-Bus
34 VARAN
35 CC-Link IE
36 Modbus-TCP
37 SERCOS III
38 DRIVE-CLiQ
39 SSCNET III
40 CC-Link IE Control
41 CC-Link IE Field
42 IO-Link
43 SSI
44 ET-Connection
45 CC-Link IE Field Basic
46 PortToPort

part : Mounting site

Internal value

Display value

0 Not defined
1 Mounting panel
2 Pivoting frame
3 Door
4 Side section
5 Top cover

part : Door: Hinge

Internal value

Display value

0 Left
1 Right

variant : Unit: Conductor cross-section / diameter

Internal value

Display value

0 As in project
1 mm²
2 qmm
3 AWG
4 mm
5 KCM
6 MCM
7 Zoll
8 "
9 inch
10 µm
11 kcmil
12 µm²

terminal : Connection point direction

Internal value

Display value

0 Automatic
1 Up
2 Down
3 Left
4 Right

terminal : Connection category (default) / terminalPosition : connection category

Internal value

Display value

0 Undefined
1 Screw clamp connection single
2 Screw clamp connection double
3 Cage clamp connection
4 Insulation-displacement connection
5 Screw-type connection (Ring or U cable lug)
6 Ferrule connection (cable lug)
7 Plug connection
8 Conductor plate connection
9 Plug-in connection (Fluid)
10 Nipple
11 Internal thread
12 External thread
13 Compression nut
14 Compression fitting
1015 Screw connection
1016 Spring pulley connection
1017 Push-in connection
1018 Penetration connection
1019 Plug-in connection
1020 Push-wire connection
1021 Bolt connection
1022 Flat plug-in connector
1023 Crimp connection
1024 Band connection
1025 Rail connection
1026 Soldering lug connection
1027 Wrap post

part : Type

Internal value

Display value

1 Component
4 Assembly
5 Module

terminal : Type (default)

Internal value

Display value

0 Undefined
1 Cut
2 Strip
3 Crimp
4 Other

Other values can be freely specified in the "tblLookup" table under the "TerminalType" key ("keyName" field).
The internal value has to be set in the "nr" field and the display value in the "name" field.
The display value is a multilingual text. Example:

Key
("keyName" field)

Internal value
("nr" field)

Display value
("name" field)

TerminalType 5 en_US@Dualsleeve;
TerminalType 6 en_US@Flcn. narrow;
TerminalType 7 en_US@Flcn. wide;
TerminalType 8 en_US@Cbllug M4:8;
TerminalType 9 en_US@Cbllug M4:9;
TerminalType 10 en_US@Cbllug M4:10;
TerminalType 11 en_US@Cbllug M4:11;

blockingSurfacePosition : Type

Internal value

Display value

0 Restricted placing area
1 Restricted drilling area

mountingPanelPosition : Mounting location

Internal value

Display value

0 Back
1 Left
2 Right

drillingPosition : Drill type

Internal value

Display value

0 Undefined
1 Drill
2 Thread
3 Rectangular
4 Slotted hole
5 Hexagon
6 Octagon
7 User-defined outline

drillingPosition : Subtype

Internal value

Display value

0 Undefined
1 Square
2 Chamfered
3 Rounded

terminalPosition : Pin type

See terminal : type (default)

terminalPosition : Direction

Internal value

Display value

0 Automatic
1 Up
2 Down
3 Left
4 Right

address : Type

Internal value

Display value

11 Customer
12 Manufacturer / supplier

functiontemplate : idx1 (Item IDs (3D) for function definition 15000.3.1)

Internal value

Display value

2 Frame profile vertical left front
3 Frame profile vertical left back
4 Frame profile vertical right back
5 Frame profile vertical right front
6 Frame profile horizontal
133 Frame profile - general
137 Frame profile horizontal cover
138 Frame profile horizontal floor

functiontemplate : idx1 (Item IDs (3D) for function definition 15100.4.4)

Internal value

Display value

7 Side panel left
8 Side panel right
9 Floor
10 Roof plate
11 Rear panel
12 Panel general

functiontemplate : idx1 (Item IDs (3D) for function definition 15100.6.1)

Internal value

Display value

14 Door
15 Door left
16 Door right

functiontemplate : idx1 (Item IDs (3D) for function definition 16000.1.2)

Internal value

Display value

10001 Mounting surface
10002 Mounting panel front
10003 Mounting panel back
10004 Door outside
10005 Door inside
10006 Door left outside
10007 Door left inside
10008 Door right outside
10009 Door right inside
10010 Side panel left outside
10011 Side panel left inside
10012 Side panel right outside
10013 Side panel right inside
10014 Cover outside
10015 Cover inside
10016 Floor outside
10017 Floor inside
10018 Rear panel outside
10019 Rear panel inside
10020 Panel outside
10021 Panel inside
10022 Profile level
10023 Profile level left inside
10024 Profile level right inside
10025 Profile level back inside
10026 Profile level front inside
10027 Profile level floor inside
10028 Profile level cover inside
10029 Profile level left outside
10030 Profile level right outside
10031 Profile level back outside
10032 Profile level front outside
10033 Floor sheet inside
10034 Floor sheet outside
10035 Profile level left inside vertical
10036 Profile level right inside vertical
10037 Profile level back inside vertical
10038 Profile level front inside vertical
10039 Mounting surface NC front
10040 Area floor sheets
10041 Profile level door
10042 Profile level door left
10043 Profile level door right
10044 Flange plate inside
10045 Flange plate outside
10046 19-inch profile level
10047 Mounting surface Copper
10049 Wiring comb front
10050 Wiring comb rear

functiontemplate : idx1 (Item IDs (3D) for function definition 16001.1.3)

Internal value

Display value

1000 Rectangle square
1001 Rectangle rounded
1002 Rectangle chamfered