Transferring DXF Data for Copper Rails to the Steinhauer ModCenter

This functionality is only available for certain module packages. Info / Copyright

You are here:

Transferring DXF Data for Copper Rails to the Steinhauer ModCenter

During the copper DXF export of manufacturing data for the machining it is now also possible to transfer DXF data for busbars made of copper to the Steinhauer ModCenter.

Benefit:

Through this extension you can now also transfer data from cut-outs to the Steinhauer ModCenter which are then drilled by this processing center into copper rails.

To this purpose the new group box Format for field is available in the settings for the copper DXF export in the Items tab (command path: File > Settings > Company > Machining > Copper export DXF) - analog to the NC DXF export. The Display field setting available here must be activated here so that the copper rails can be processed in the Steinhauer ModCenter. This is not the case as a default.

Note:

The copper DXF export of manufacturing data is licensed via an optional fee-based extension module. You can find specifications on this in the current performance description for EPLAN Pro Panel.