Pipings are displayed with interruptions in the P&I diagram in accordance with the standard DIN 28000-4:2014-07 if the piping course overlaps with another symbol (for example container) or another piping. To insert such interruptions in the P&I diagram, the
Benefit:
By means of the new symbol for piping interruptions you can display the interruptions in the P&I diagram.
In the preview in the Symbol selection dialog select the fitting variant of the interruption symbol for a vertical or horizontal piping section. For the desired piping click the positions between which the interruption is to be inserted. The piping is not deleted between these two positions but only graphically interrupted.
See also
Permanently Showing the Flow Direction of the Piping Route
Inserting Interruptions for Pipings