Use a basic project to customize designations and names to the target standard. The setting for rotation / flipping specifies, in combination with the selected symbol libraries, the location of the schematic elements in the schematic.

Preconditions:

• You have opened a project.
• In the case of several opened projects: You have selected a project in the page navigator.
• You have a basic project containing country- or standards-specific settings.
• You have set up a target project.

1. Select the following commands: Tab Tools > Command group Standards > Exchange.
2. Open a file selection dialog via in the Basic project field of the Rotation / flipping tab and there select the desired basic project *.zw9 or the desired backed up Eplan project *.zw1.
3. From the Rotation / flipping drop-down list, select the way in which you want to rotate and flip.
4. Click [Next].
   
   Replacing Plot Frames, Forms and Function Definition Libraries

See also

Replacing Symbol Libraries and Symbols (Changing Standards)

Creating Allocation Schemes for Symbols (Changing Standards)

Defining the Project Structure (Changing Standards)

Specifying Device Numbering (Change of Standard)