Check Run Messages: Cables

Message number	Message text
P003001	The automatic cable selection is being canceled, because no cable could be preselected
P003002	It is not possible to make an automatic cable selection for this cable, because no corresponding filter criterion was found
P003003	Mismatch between connection DT and cable DT
P003005	Cable target with incomplete DT
P003006	Cable between same item
P003007	Multiple cable targets
P003008	Cable connection without cable
P003009	Differing cable data: <x>
P003011	Too many cable connections
P003012	Color / number assigned twice (for same shields / indexes)
P003013	Several PE conductors intersected
P003014	Several N conductors intersected
P003018	Shield applied too often
P003019	Subcable generated
P003022	Invalid cable length
P003023	Mismatch between quantity of parts and setting for adding up cable lengths
P003024	The cable and its cable connections do not have the same intrinsic safety state.
P003025	Number of connections not specified
P003026	Cable length not specified
P003027	Cable: 'Function text (automatic)' different (in language '<x>')
P003028	Cable does not use all the cable connections of the part
P003029	For cable connection '<x>' the connected pin '<y>' of the prefabricated cable is not specified as the conductor start or conductor end