Cause

In the local parts database a part that has one of the following problems was identified during the upload of parts to the Eplan Cloud or during the synchronization of parts data with the parts data in the Eplan Cloud:

• The part number had already been assigned for another part.
• The part has part variants with identical variant designations.

This can occur, for example, when parts data were edited via the Eplan API or manually in the XML file to be imported.

Solution

Ensure that each part has a unique part number and each variant of a part has a unique variant designation.

1. In the parts management mark the line with the message in the Messages tab and select the Go to popup menu item for this line.
   The respective part is marked in the tree view of the parts management.
2. Bring the Properties tab for the selected part or selected part variant to the foreground.
3. Correct the part number or the variant designation.
4. Check the Messages tab to see if there are any other messages for the part and correct the reported errors, if required.
5. Repeat the synchronization or upload the part again to the Eplan Cloud.