You can open the part selection tool via the popup menu in the bill of materials navigator and the device list.

Select parts from the Bill of materials navigator

1. Select the following commands: Tab Devices > Command group Devices > Bill of materials.
2. Mark an entry and select the popup menu item Add part or Exchange part.
3. In the Part selection dialog search through the tree structure and select one or more desired parts.
4. Click [OK].
   
   The new part is assigned to the marked device. In Exchange part, the old part is replaced, while in Add part existing part references are retained.

Select parts from the device list

1. Select the following commands: Tab Devices > Command group Devices > Drop-down button Navigator > Device list.
2. Select the Add part popup menu item.
3. In the Part selection dialog search through the tree structure and select one or more desired parts.
4. Click [OK].
5. You store the part-specific data in the dialog Properties.
   
   The parts data are written into the Device list. A new entry is created for the part to be monitored.

See also

Selecting Parts

Part / Device Selection

Dialog Part selection