The symbol libraries used in the project are entered into the project-specific settings and can be exchanged for other libraries.
Preconditions:
- You have opened the project whose symbol libraries are to be exchanged.
- The symbols and variants used in the project must exist in both libraries. The decisive factor here is the position of the symbols in the library, i.e. the symbol number.
- Select the following commands: File > Settings > Projects > "Project name" > Management > Symbol libraries.
- Click [...] in the field for the desired symbol library in the Settings: Symbol libraries dialog.
The Select symbol library dialog is opened. If the symbol library should not be removed, then a message is displayed. - Select the desired symbol library.
- Click [Open]. The two symbol libraries are compared. If differences are found that prevent the libraries from being exchanged, then an appropriate message is displayed.
- If the two symbol libraries are compatible, click [Yes] in the Exchange symbol libraries dialog. The symbol library in the project is replaced with the new symbol library.
See also