The following commands can be used to create projects, code, structure and function-block numbers for Step7:
- Step7.GenerateSimaticProjectCommand: Passes the created Simatic program code to the Simatic-Manager. The Simatic-Manager must be installed on the workstation. In the preferences the Simatic project in one source option under Disciplines > PLC > STEP 7 > Simatic is to be marked. If the option is not marked, only the marked sources are compiled and replaced in the Simatic-Manager.
- Step7.GenerateStep7CodeCommand: Generates the S7 program code.
- Step7.GenerateStep7NumbersCommand: Generate the block numbers for S7 blocks.
- Step7.GenerateStep7StructureCommand: Generates the S7 structure.