Formulas must also be inserted for the parameters of the installed components:
- Open the Axis Functionunit.
- Select the installed Cylinder component.
- Enter the following formula for the Symbol parameter:
=mc.$Symbol_Cylinder
- Repeat steps 2 and 3 with the following data:
Installed component |
|
Value |
Position_1 |
Symbol |
=mc.$Symbol_Position_1 |
Position_2 |
Symbol |
=mc.$Symbol_Position_2 |
Position_3 |
Symbol |
=mc.$Symbol_Position_3 |
Position_4 |
Symbol |
=mc.$Symbol_Position_4 |
- Repeat steps 1 and 3 for the following units:
Functionunit |
Installed component |
Parameter |
Value |
Gripper |
Valve |
Symbol |
=mc.$Symbol_Valve |
Pressuresensor |
Symbol |
=mc.$Symbol_Pressuresensor |
Orientationinspector |
Positionssensor_optical |
Symbol |
=mc.$Symbol_Position_1 |
Separator |
Cylinder |
Symbol |
=mc.$Symbol_Cylinder |
Position_1 |
Symbol |
=mc.$Symbol_Position_1 |
Position_2 |
Symbol |
=mc.$Symbol_Position_2 |
Stack |
Positionssensor_optical |
Symbol |
=mc.$Symbol_Position_1 |