This functionality is only available for certain module packages.

Comparison with sample solution

To compare the results achieved with the sample solution, the following EOX file is imported:

<EEC installation folder>\install\Tutorial\Word\Word.eox.

Importing the EOX file:

  1. Select File > Import... (File > Import...).
  2. The import wizard opens with the Import dialog:

  3. Select Model > Engineering Object Exchange Format (EOX Format).
  4. Press Next > to confirm.
  5. Select Add in the Mode panel.
  6. Select the file Word.eox in the Source panel.
  7. Select the Feeder library.
  8. Press Finish to confirm.

The following symbols appear in the figure above of the synchronization view:

Symbol Meaning
The incoming changes shown with a plus sign (+) indicate that a component is missing in your solution.
The incoming changes shown with a minus sign (-) indicate that there is one more component in your solution than in the sample solution.
The incoming changes shown with the red double arrow indicate that action is required on the part of the user.

Incoming changes generally indicate that your solution differs from the sample solution. Double-click on the incoming change to view further information on the component.