This functionality is only available for certain module packages.

Import EOX files for EPLAN Pro Panel

The T_Pro Panel_Ui discipline library, as well as the T_Mechatronic_Architecture and T_Mechatronic_ModularSystem libraries created in the ‘Mechatronics’ section, must be available before the Pro Panel discipline components are imported.

Based on the initial situation, various EOX files that contain the corresponding libraries must be imported:

<EEC installation folder>\install\Tutorial\Mechatronic\Mechatronic.eox
<EEC installation folder>\install\Tutorial\ProPanel\ProPanel_Ui.eox
<EEC installation folder>\install\Tutorial\ProPanel\ProPanel_Ui.eox
<EEC installation folder>\install\Tutorial\Mechatronic\Mechatronic.eox

Proceed as follows to import the required EOX files:

  1. Start EEC
  2. Select File > Import... (File > Import...).
  3. The import wizard opens with the Import dialog:

  4. Select Model > Import wizard for model files in Engineering Object Format (EOX Format).
  5. Press Next > to confirm.
  6. Select Add in the Mode panel.
  7. Select the required EOX file in the Source panel.
  8. Select the required libraries.
  9. Press Finish to confirm.
  10. Use the button to apply all incoming changes in the Synchronization view.
  11. If necessary, repeat steps 2 to 9 and select the next EOX file that you need.