Project data > Connections > Wire harness navigator.
The wire harnesses and the components contained in the wire harnesses (connections, pins, cables, parts, etc.) are displayed and managed in this dialog. You can edit the properties of these components via the popup menu.
Overview of the main dialog elements:
This drop-down list displays all the available filters. A selected filter is automatically activated and is applied to both the tree and the list view. The "- Not activated -" entry deactivates the filter and causes an unfiltered display of the data. Click [...] to open the Filter dialog. Here you can create, edit, delete, copy, export, import, and manage filters.
The popup menu of the Filter drop-down list contains the following entries:
- Deactivate: This popup menu item is available if a filter has been set: Resets the filter setting to the "- Not activated -" entry.
- Activate <filter name>: This popup menu item is available if the filter setting is "- Not activated -": Reactivates the last active filter.
This allows you to toggle rapidly between the unfiltered representation and a representation filtered in accordance with your requirements.
Use this field, via Quick input, to adjust quickly the value of a filter criterion for a defined and activated filter.
Displays the wire harnesses of one or more projects in a hierarchical structure. The top hierarchy level is the project - in as far as several projects are opened. The wire harnesses are displayed under it (icon ).
The hierarchical level below it contains the first part of the wire harness as well as the wire harness components - in as far as they exist. The components (connections, cables, pins, etc.) are subdivided into different hierarchical levels in accordance with the categories of the function definitions (icon ). Otherwise these components are displayed similarly to in other navigators.
Special features:
- The components that are entered as further parts at the wire harness are displayed below the tree structure level Other wire harness components.
- Both the source and the target are displayed (separated by an arrow) for the cable connections displayed under the cable DTs.
- If the Part allocation property was used to specify for a part at a component that it is an accessory part this is displayed in an additional hierarchical level (icons for accessories , for parts (source) , for parts (target) ).
Displays the wire harnesses of one or more projects and the components contained in the wire harnesses in a list. The view of the wire harnesses depends on the column configuration selected in the Configure representation dialog.
See also