Dialog call:You have opened a project whose parts are to be synchronized. No editor for working on master data (Plot frame editor, Form editor, etc.) is opened.
Tab Master data > Command group Parts > Synchronize. You have marked a stored part in the Synchronization of parts dialog that is also available in the parts database. [Extras] button > Compare stored part.
In this dialog, the properties of a marked part stored in the project and the properties of the associated system part are compared in the parts database. The stored part is the reference part (left part column). The values of the properties are only displayed and cannot be edited by you. In the table, the properties are listed by row and the parts by column, with their part number and variant designation (in brackets).
Overview of the main dialog elements:
You can specify the display of the properties by means of the following buttons:
|
Button |
Meaning |
|---|---|
|
|
Shows all properties. |
|
|
Only shows the properties for which a value is available. |
|
|
Shows only those properties for which there is a difference. |
|
|
Shows the configured properties from the scheme. |
(All properties)
(Filled properties)
(Show only differences)If the button 
(From scheme) is activated, you can select a scheme for display and editing of the properties from the drop-down list. Click [...] to open the Configure properties dialog. There you can specify for a scheme which properties are to be displayed in the Compare parts dialog and in which sequence.
Note:
The schemes for part properties created In the parts management in the Properties tab are also available in the Compare parts dialog and vice versa.
Into this field enter the text for which the properties are to be filtered. Both the names of the displayed properties as well as the values of the parts are searched.
If you want to return to the original view of the properties, remove the search term from the entry field. Click 
(Delete) to do so.
Property / <Part number (variant)>:
Shows the values of specific properties for the marked, stored part and the associated system part.
If there are different values for properties between the stored part and the system part, these cells of the system part are highlighted by a background with a different shade of gray.
Which properties are displayed here depends on the selected scheme / button for the properties.
Popup menu:
The popup menu provides - depending on the field type (e.g. date, integer, multilingual) - the following menu items that are, depending on the situation, available for influencing the table or editing the values in the fields. You can find an overview of these popup menu items in the section Popup menu items.
See also